Implementing Cisco Service Provider Advanced Routing Solutions (SPRI)

The Implementing Cisco Service Provider Advanced Routing Solutions (SPRI) training teaches you theories and practices to integrate advanced routing technologies including routing protocols, multicast routing, policy language, Multiprotocol Label Switching (MPLS), and segment routing, expanding your knowledge and skills in service provider core networks. 

This training prepares you for the 300-510 SPRI v1.1 exam. If passed, you earn the Cisco Certified Specialist – Service Provider Advanced Routing Implementation certification and satisfy the concentration exam requirement for the Cisco Certified Network Professional (CCNP) Service Provider certification. This training also earns you 37 Continuing Education (CE) credits toward recertification. 

How You'll Benefit

This course will help you:

• Gain the high-demand skills to maintain and operate advanced technologies related to Service Provider core networks
• Increase your knowledge and skills for implementing Service Provider core advanced technologies through hands-on application and practical instruction
• Prepare for the 300-510 SPRI v1.1 exam
• Earn 37 CE credits toward recertification
   

Upon completing this course, the student will be able to:

• Configure multiarea OSPF
• Configure OSPF special area types and optimization features
• Configure IS-IS multilevel networks and optimization features
• Configure BGP to influence outbound and inbound BGP route selection
• Implement BGP route reflectors and confederations
• Describe the main characteristics of routing protocol tools that are used in service provider environments
• Implement the Routing Policy Language
• Configure route redistribution
• Troubleshoot routing protocols in the service provider network
• Describe, implement, and troubleshoot MPLS in service provider network
• Describe and implement segment routing technology
• Introduce and implement segment routing IPv6
• Implement BGP security options
• Implement advanced features to improve convergence in BGP networks
• Implement Topology Independent Loop-Free Alternate (TI-LFA)
• Describe Cisco MPLS traffic engineering
• Describe how traffic engineering is used in segment routing networks
• Implement and configure advanced SR-TE features
• Implement IPv6 tunneling mechanisms
• Describe IP multicast concepts and technologies
• Implement and verifying the PM-SM protocol
• Implement enhanced PIM-SM features
• Implement MSDP in the interdomain environment
• Implement mechanisms for dynamic RP distribution

What to Expect in the Exam

Implementing Cisco Service Provider Advanced Routing Solutions (300-510 SPRI) v1.1 is a 90-minute exam associated with the Cisco Certified Specialist – Service Provider certification and satisfies the concentration exam requirement for the CCNP Service Provider certification.  

This exam tests your knowledge of implementing service provider advanced routing technologies, including: 

• Routing protocols
• Policy language
• MPLS
• Segment routing

The primary audience for this course is as follows:

• Network Administrators
• System Engineers
• Project Managers
• Network Designers

There are no prerequisites for this training. However, the knowledge and skills you are recommended to have before attending this training are: 

• Intermediate to advanced knowledge of Cisco Internetwork Operating System (Cisco IOS®) or IOS XE and Cisco IOS XR Software configuration
• Knowledge of IPv4 and IPv6 TCP/IP networking
• Intermediate knowledge of BGP, OSPF, and ISIS routing protocols
• Understanding of MPLS technologies
• Understanding of multicast technologies
• Familiarity with segment routing

These skills can be found in the following Cisco Learning Offerings:     

• Implementing and Administering Cisco Solutions (CCNA)
• Implementing and Operating Cisco Service Provider Network Core Technologies (SPCOR)

Course Outline

Module 1: Configure OSPF Multiarea Networks

Module 2: Configure OSPF Special Area Types

Module 3: Configure OSPF Optimization Features

Module 4: Configure IS-IS Multilevel Networks

Module 5: Configure IS-IS Optimization Features

Module 6: Introducing Routing Protocol Tools

Module 7: Introducing Routing Policy Language

Module 8: Influencing Outbound BGP Route Selection

Module 9: Influencing Inbound BGP Route Selection

Module 10: Scaling BGP in Service Provider Networks

Module 11: Implementing Route Redistribution

Module 12: Troubleshooting Routing Protocols

Module 13: Improving BGP Convergence and Implementing Advanced Operations

Module 14: Multiprotocol Label Switching

Module 15: Cisco MPLS Traffic Engineering

Module 16: Troubleshooting MPLS

Module 17: Segment Routing

Module 18: Implementing Segment Routing

Module 19: Segment Routing for IPv6

Module 20: Implementing Segment Routing for IPv6

Module 21: Segment Routing TI-LFA

Module 22: Segment Routing Traffic Engineering

Module 23: Advanced Segment Routing Traffic Engineering Features

Module 24: Securing BGP

Module 25: Deploying IPv6 Tunneling Mechanisms

Module 26: IP Multicast Concepts and Technologies

Module 27: Implementing PIM-SM Protocol

Module 28: Implementing PIM-SM Enhancements

Module 29: Implementing Interdomain IP Multicast

Module 30: Implementing MPLS

Module 31: Implementing Distributed Rendezvous Point Solution in Multicast Network 
 

LAB OUTLINE

• Implement OSPF Special Area Types (IPv4 and IPv6)
• Implement OSPF Route Summarization (IPv4 and IPv6)
• Implement Multiarea IS-IS
• Implement IS-IS Route Summarization
• Implement Outbound BGP Route Selection
• Implement Inbound BGP Route Selection
• Implement BGP Route Reflectors
• Implement Route Redistribution
• Troubleshoot Routing Protocols
• Configure and Verify IGP Segment Routing
• Configure and Verify SRv6
• Configure and Verify SR TI-LFA Using OSPF
• Configure and Verify SR TI-LFA Using IS-IS
• Configure and Verify SR-TE Using OSPF
• Configure and Verify SR-TE Using IS-IS
• Configure and Verify ODN and Flexible Algorithm
• Implement BGP Security Options
• Implement Tunnels for IPv6
• Enable and Optimize PIM-SM
• Implement PIM-SM Enhancements
• Implement MPLS in the Service Provider Core
• Implement Rendezvous Point Distribution